HOW TO USE

Welcome to Wakevo! This is your starting point, everything you need to set up your silent vibrating alarm and get going in just a few minutes.

What are we after? Helping you take control of your mornings and begin each day on your own terms.

Your silent vibrating alarm wakes you gently and on time, without the jarring noise of a traditional alarm, so you can build a calmer morning routine and get up feeling refreshed and ready. Watch the video below to see exactly how the band works and how it can set you up for a better start to the day.
Setting Up Your Wakevo Band

Before You Start A Few Things Worth Knowing

  • The band has a built-in time-out: if you wait longer than 4.5 seconds without doing anything during setup, it will jump back to the time screen on its own. So keep things moving — make your next move within 4.5 seconds to stay in the setup.

  • How to confirm a step: every time you want to lock something in (moving from hours to minutes, for example, or saving an alarm), press and hold the button for 3 seconds.

Didn't get through it in one go? That's completely fine. Just go back to the time screen, hold the button for 3 seconds again, and the hour will start flashing so you can start over.

We'd suggest watching the setup video alongside these steps it makes everything easier to follow.
1. Setting the Time and Date

Press the button once to switch the band on; the current time appears, ready to be adjusted. Press and hold the button for 3 seconds to begin, and the "hour" digits will start flashing. Tap the button to set the hour, then hold it for 3 seconds again to move on to the minutes. Use the same pattern to set the minutes, the month, the day, and the year. You can also pick whether you'd like a 12-hour or a 24-hour display.

Once you've worked through all of it, simply leave the button alone for 8 seconds. The band saves everything automatically and drops back into standby mode. That's it — your band is set up and good to go.
2. Setting Up the Alarm

Turning an alarm on: Press the button twice to bring up the first alarm slot. Seeing "A1 OF" just means that alarm is switched off by default. To activate it, press and hold the button for 3 seconds, the hour will begin flashing. Tap the button to set the hour, then hold it again to move across to the minutes. With the minutes set, hold the button one more time for 3 seconds to save. Your alarm is now live.

Good to know: once an alarm is set, it repeats at the same time every day until you change or switch it off yourself. That's handy if you wake up at a fixed time, set it once and forget about it.

Want more than one alarm? Press the button three or four times to reach the other alarm slots, then follow exactly the same steps.

Turning an alarm off: Press the button the right number of times to land on the alarm you want to switch off. With it on screen, press and hold for 3 seconds, then tap the button until "A1 OF" appears. Hold for 3 seconds once more and the alarm is switched off.
3. Checking the Battery and Charging

To see how much charge is left, make sure the band is idle, then press and hold the button for 3 seconds — the battery percentage will show on screen. For a full walkthrough of charging, take a look at our video.